Welcome to Frontier Pitts      Products      Blockers      Security Blockers      Road Blocker

Road Blocker

Road Blocker

The Security Height Road Blockers has lift height options of 353mm & 533mm, with widths up to 5m.

Road Blockers provide higher levels of security with built in stopping power, and are used extensively for premises such as banks, embassies, bullion depots, cargo parks, ports and lorry parks.

100% duty rating – designed for continuous and frequent use. Power is supplied from a three phase 400V power supply as standard.

The Road Blocker can be interfaced to any access control systems. Traffic Light System included as standard. It is recommended that the Road Blocker’s hydraulic control cabinet is installed within 10metres of the blocker.

  • Lift Height options of 353mm & 533mm
  • Maximum width: 5000mm

Contact Technical Sales

BIM & NBS Specifications

View Case Studies

Product Brochure

Data Sheet

Drawing

Security Height Roadblocker Specifications

Features

The Security Height Roadblocker

    Basic Specs

  • Security Height Roadblocker
  • Lift height 353mm or 533mm
  • Width: Variable up to 5000mm

    • More details

  • Construction: The blocking segment shall be constructed of heavy steel section with steel front plate and covers
  • Finish: Shotblasted, hot zinc sprayed (galvanised), primed and finished with a final coat of polyurethane paint. Client to advise RAL paint number. Alternative finishes available on request. Frontier Pitts Special Lifetime Paint; an anti-slip paint for road vehicles available on request.
  • Options: Accumulator – allows a number of operations in power failure mode, EFO(Extra Fast Operation), Manual Hand pump, High Security Cabinet, Anti-tamper alarms
  • Accessories Included: Industrial hydraulic pump drive unit, Motor protection, Security lock on cabinet door, Instantly Reversible, Override Switch, Switched fused supply, Mains indicator lamp, Reinforced hoses for long service life, Long life hydraulic seals
  • Speed of operation: 3-6 seconds *This is subject to a risk assessment to ensure the automatic equipment complies to BS EN 12453, Depending on configuration
  • Duty Cycle: 100% duty rating
  • Safety: Vehicle Detector Loops, Safety Photocells, LED Traffic light heads
  • Controls: The programmable logic controller (PLC) with built in safety features will accept inputs from access control systems including access card, voice, etc. Push button as supplied as standard
  • Accreditations: Secured by Design, BRE Global

Civil Engineering

353mm or 533mm lift height

 Blocker Foundations
533mm lift Security Height Road Blocker
Total Width:
Blocker Width + 630mm x L:800mm x Embedment D:465mm
Note: Power and control wiring ducts to be incorporated into foundations.
Control Cabinet Foundations: 800mm SQ x D:300mm

For more information please contact the Technical Sales Department on

01293 422800 or email:

[email protected]

Electrical Engineering

Industry standard electricals

 Electrical Requirements: Three Phase, Depending on configuration

Specifications subject to change and are dependant on product options. Please contact Frontier Pitts to request more information.

 

Photo Gallery

Accessories

Road Blockers

Signage

 Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’

Traffic Light System

 Traffic Light systems are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet

Lights in Blocker

 Internal lights within the skirt of the road blocker for better visibility

Traffic Light Cage

 Vandal resistant traffic light cages

Manual Handpump

 In the event of a power failure, a hand pump/release can be provided to enable the manual raising and lowering of the blocker/bollard.

Vehicle Detector Loops

 Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.

Safety Photocells

 Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.

Stainless Steel Cabinet

 As standard, the road blockers/bollards control cabinet is shotblasted and finish with a final coat of polyurethane paint. However a Stainless Steel finish is also available as an option.
Subscribe to get the latest news about our products
We respect your privacy, we will not spam you.